Packing List
The type and quantity of accessories may vary. Please refer to the actual items you receive.
| P2S Combo | P2S |
|---|---|
| P2S AMS 2 Pro Build Plate (pre-installed on the heatbed) Anti-Vibration Feet (pre-installed on the printer) | P2S Build Plate (pre-installed on the heatbed) Anti-Vibration Feet (pre-installed on the printer) |
image | image |
| Accessory Box - Power Cord - Bambu Bus Cable 6-pin - Spool Holder Assembly - PTFE Tubes ×3 (600 mm, 555 mm, 350 mm) - Touchscreen | - Spool Holder Assembly - Touchscreen - PTFE Tubes ×2 (555 mm, 180 mm） - Power Cord |
| Toolbox - Hotend Silicone Sock - Filament Cutter - Unclogging Pin - Nozzle Wiping Pad - Scraper Blade - Screws for Scraper - Allen Key (H1.5 & H2.0) - Lubricant Oil - Lubricant Grease | Toolbox - Hotend Silicone Sock - Filament Cutter - Unclogging Pin - Nozzle Wiping Pad - Scraper Blade - Screws for Scraper - Allen Key (H1.5 & H2.0) - Lubricant Oil - Lubricant Grease |
| Desiccant for AMS | / |
| Quick Start Guide Warranty Leaflet Disclaimer and Safety Guidelines | Quick Start Guide Warranty Leaflet Disclaimer and Safety Guidelines |
Accessories Overview
| Photo | Name | Description |
|---|---|---|
image | Textured PEI Build Plate | Comes pre-installed on the heatbed for printing, with both sides available for use. |
image | Touchscreen | 5-inch, 854×480 full-color touchscreen. |
image | Hotend Silicone Sock | Covers the nozzle to reduce heat loss, maintain stable temperatures, and prevent filament buildup. |
image | Filament Cutter | Spare cutter, used to replace a damaged extruder cutter. |
image | Unclogging Pin | Used to clear hotend clogging. |
image | Nozzle Wiping Pad | Used to clean the nozzle before a print. Replace when the original one is worn. |
image | Scraper Blade | For assembling a scraper. A scraper model can be found in the printer’s built-in models, which you can print and assemble with the blade. |
image | Screws for Scraper | For assembling a scraper. |
image | Allen Key (H1.5 & H2.0) | Assembly and disassembly tools. |
image | Lubricant Oil | For lubricating linear rods and idler pulleys. |
image | Lubricant Grease | For lubricating lead screws and extruder gears. |
image | Power Cord | Connect the printer to the power supply. |
image | Bambu Bus Cable 6-pin | Connect the AMS 2 Pro to the printer. |
image | Spool Holder Assembly | For holding the external spool. |
image | PTFE Tube | For the transportation of filaments. |
image | Desiccant for AMS | Placed inside the AMS to keep the air dry and protect filaments from moisture. |