The type and quantity of accessories may change from time to time. Please refer to the actual items you receive.
The P1P package comes with a Screen, Spool Holder, Filament, Spare Hotend, Nozzle Wiping Pads, Power Cord, Unclogging Pin Tool, PTFE Tube, Bambu Scraper, Allen Keys, PTFE Tube Anchor, Textured PEI Plate (Pre-installed on the heat bed of the printer).
Please note that the products you receive may undergo material changes and version iterations. Therefore, we kindly request you refer to the actual product you receive.
| NO. | Physical photos | Description | Application | Marks |
| 1 | image | Bambu Textured PEI Plate | Placed on the heat bed to hold the model. | Pre-installed on the heat bed of the printer |
| 2 | image | LCD Screen | ||
| 3 | image | Spool holder | It is installed on the back of the printer, fixed with 2 screws. | |
| 4 | image | Bambu Reusable Spool | Installed with Filament below | |
| 5 | image | Bambu PLA Basic 1000g | Installed with reusable spool above | |
| 6 | image | Spare stainless steel 0.4 mm hotend | P1P spare hotend, replace the original nozzle when it is damaged. | |
| 7 | image | Nozzle Wiping Pad | Spare nozzle Pad, replace it when the Wiping Pad is damaged. | |
| 8 | image | Power Cord | ||
| 9 | image | Unclogged tool for 0.4 mm nozzle | Special unclogged tool for the 0.4 mm hot end | The hot end has been separated from the extruder and is heated. |
| 10 | image | PTFE Tube | ||
| 11 | image | Bambu scraper | Print 'Scraper grip' from the built-in files， and then install the scraper to it. | |
| 12 | image | H1.5/H2.0 hex keys | Disassembly and assembly tools | |
| 13 | image | PTFE Tube Anchor | It is installed on the back of the printer, fixed with 2 screws. | |
| 14 | image | Thermal grease |
Improve the thermal conductivity of the thermistor、ceramic heater with the nozzle, which may be used when replacing the above accessories. | |
| 15 | image | Lubricant grease | Special grease for lead screw | |
| 16 | image | Spare screws for the extruder | ||
| 17 | image | Spare screws for DIY shells | ||
| 18 | image | Quick Start Guide | ||
| 19 | image | 32 GB Micro SD card, pre-installed in the printer (For the appearance of the card, please refer to the one you receive.) | Store files such as print files, cached files, and videos of the printing process. |