Note: This page uses the H2D machine as an example. The replacement steps are exactly the same for the H2S, and H2C.
Front Glass Door/Front Laser Safety Window
Front Glass Door/Front Laser Safety Window is installed in front of the printer. The color of the front glass door is black, and the color of the front laser safety window is green. Therefore, there are 2 types of front door spare parts for H2D. You can choose the corresponding spare parts according to your needs:
Front Glass Door
Front Laser Safety Window
- Front glass door：
Front glass door (pre-installed front door handle) *1
M3x3 (Nut diameter 10mm) screw - For fixing the front door* 4
- Front Laser Safety Window：
Front Laser Safety Window (pre-installed front door handle) *1
M3x3 (Nut diameter 10mm) screw - For fixing the front door * 4
When to use
When the front glass door/front laser safety window is cracked or damaged.
Tools and materials needed
Front glass door/front laser safety window - Please replace the corresponding spare parts as necessary
H2.0 Allen key
The screw specifications and quantities involved in replacing the H2D front glass door/front laser safety window (it is recommended to properly store the removed screws to prevent loss).
| Screw specifications | Screw image | Location | Location diagram | Screw quantity | |
|---|---|---|---|---|---|
| M3x3 (nut diameter 10mm) | Used to fix the front glass door | image | image | 4 |
Safety Warning
IMPORTANT!
It's crucial to power off the printer before conducting any maintenance work, including work on the printer's electronics and tool head wires. Performing tasks with the printer on can result in a short circuit, leading to electronic damage and safety hazards.
During maintenance or troubleshooting, you may need to disassemble parts, including the hotend. This exposes wires and electrical components that could short circuit if they contact each other, other metal, or electronic components while the printer is still on. This can result in damage to the printer's electronics and additional issues.
Therefore, it's crucial to turn off the printer and disconnect it from the power source before conducting any maintenance. This prevents short circuits or damage to the printer's electronics, ensuring safe and effective maintenance. По любым вопросам или сомнениям, связанным с этим руководством, мы рекомендуем отправить запрос в техподдержку.
Remove the Front Glass Door/Front Laser Safety Window
This guide uses the front glass door as an example. The front laser safety window can be replaced by referring to the following steps.
Use an H2.0 Allen key to remove the 4 screws (M3x3, nut diameter 10mm) that secure the front door, 2 screws on the top and 2 screws on the bottom. Then hold the front glass door with one hand and remove it.
Be sure to hold the front glass door with your hands to prevent falling.
Install the Front Glass Door/Front Laser Safety Window
Align the 4 screw holes on the front door with the screw holes on the hinge, hold the front glass door steady with your hands, and use an H2.0 Allen key to tighten the 4 screws (M3x3, nut diameter 10mm).
Verify the functionality
Check that the front door does not shake, opens and closes smoothly, and the closed position is normal.