Privacy tip: Please ensure the camera is correctly installed so that the camera field of view is correctly pointing towards the printer's chamber, to avoid any detection issues of the build plate or nozzles.
The live view camera is installed inside the printer, allowing you to monitor the printing process in real-time through Bambu Studio and Bambu Handy. It also supports various intelligent detection functions such as spaghetti detection, foreign object detection, build plate detection, and hotend type identification.
Spare Parts for Live View Camera:
Live View Camera × 1
Live View Camera Cable (Replacement not needed if undamaged) × 1
M3x6 Screws × 2
Privacy Cover × 1
When to Replace
The live view camera is damaged.
This wiki only provides instructions on how to replace the camera. If the connection cable of the camera is damaged and needs to be replaced, please refer to this wiki link
Tools and Materials Needed
New live view camera
H2.0 Allen key
Non-woven cloth
Safety Warning
IMPORTANT!
It's crucial to power off the printer before conducting any maintenance work, including work on the printer's electronics and tool head wires. Performing tasks with the printer on can result in a short circuit, leading to electronic damage and safety hazards.
During maintenance or troubleshooting, you may need to disassemble parts, including the hotend. This exposes wires and electrical components that could short circuit if they contact each other, other metal, or electronic components while the printer is still on. This can result in damage to the printer's electronics and additional issues.
Therefore, it's crucial to turn off the printer and disconnect it from the power source before conducting any maintenance. This prevents short circuits or damage to the printer's electronics, ensuring safe and effective maintenance. По любым вопросам или сомнениям, связанным с этим руководством, мы рекомендуем отправить запрос в техподдержку.
Disassembly Guide
Step 1: Remove the live view camera
Use an H2.0 Allen key to remove the two fixing screws (M3x6).
Grasp the base shell of the live view camera firmly, gently push it upwards, then flip it outward. Remove the live view camera, exposing the camera cable on the back.
Step 2: Disconnect the live view camera cable
Release the socket latch, disconnect the live view camera cable, and remove the live view camera.
Note: The socket latch of the cable has been glued.
Assembly Guide
Step 1: Connect the live camera cable
Replace the live view camera with a new one, reinsert the camera cable into the socket. Ensure that the protrusions on both sides of the cable are fully inserted into the socket before securely fastening the latch. (The blue part is completely covered, indicating that the connection is secure.)
Step 2: Install the live view camera
When installing the live view camera, align the holes of the camera base with the leadscrew and insert it. The leadscrew helps to position the camera accurately.
Then align the screw holes on both sides, use an H2.0 hex key to tighten the two screws (M3x6).
After replacement, gently wipe the lens of the live view camera with a non-woven cloth to clean off any dust. If necessary, you can attach the privacy cover to the new camera.
Verify the Functionality
Connect the power cable and turn on the printer. In Bambu Studio or Bambu Handy, click the Play button to check if the video streams normally.
If the video does not display correctly, verify that the cables are properly connected and try again. If the issue persists, обратитесь в техническую поддержку Bambu Lab для получения дальнейшей помощи.