Packing list
The type and quantity of accessories may change from time to time. Please refer to the actual items you receive.
| Combo version | Non-combo version |
| - A1 printer base housing - A1 printer frame - A1 printer base housing screws (ST3-23 screws for the base) - AMS lite body (including 4-pin cable), AMS lite Stand and installation screws (BT3-8 screws for the AMS stand) - AMS lite rotary spool holder - AMS lite top mount screw set - Purge Wiper and its screws(M3-12 screws for the purge wiper) - Spool Holder - PTFE tubes (730 mm *2, 830 mm *2) - PTFE tube (1 for external spool holder, 600 mm *1) - Textured PEI Plate - Sample Filament - Unclogging Pin Tool - Allen keys (H2 and H1.5) - Heatbed Nozzle Wiper - Cable Organizer - Bambu Scraper Blade and its screws - Spare Filament Cutter and Lubricant Grease - Lubricant Oil - Supportive footpad - Quick Start Guide - Warranty Leaflet - Disclaimer and safety guidelines - 32 GB Micro SD card (pre-installed in the printer) | - A1 printer base housing - A1 printer frame - A1 printer base housing screws (ST3-23 screws for the base) - Purge Wiper and its screws(M3-12 screws for the purge wiper) - Spool Holder - PTFE tube (1 for external spool holder, 600 mm *1) - Textured PEI Plate - Sample Filament - Unclogging Pin Tool - Allen keys (H2 and H1.5) - Heatbed Nozzle Wiper - Cable Organizer - Bambu Scraper Blade and its screws - Lubricant Grease - Lubricant Oil - Supportive footpad - Quick Start Guide - Warranty Leaflet - Disclaimer and safety guidelines - 32 GB Micro SD card (pre-installed in the printer) |
| No. | Physical photos | Descriptions | Applications |
| 1 | image | A1 Base Housing | |
| 2 | image | A1 Printer Frame | |
| 3 | image | A1 printer base housing screws | For A1 printer assembly |
| 4 | image | Textured PEI Plate | Placed on the heatbed to hold the model; Both sides can be used. |
| Quick Start Guide | Read the quick start guide and familiarize yourself with the precautions for unboxing. | ||
| Disclaimer and Safety Guidelines | |||
| Warranty Leaflet | |||
| 5 | image | AMS lite Body (only for the combo version) | For AMS Lite assembly |
| AMS lite Stand and its screw (only for the combo version) | For AMS Lite assembly | ||
| AMS lite Rotary Spool Holder(*4) (only for the combo version) | For AMS Lite assembly | ||
| 6 | image | Screws for AMS lite and stiffener C clamp (only for the combo version) | 1. Fix the AMS lite to the top mount. 2. Fix the Z-axis stiffener to the c clamp. |
| 7 | image | Screws for stiffener (only for the combo version) | If your printer does not have screw holes on the back of the Z-axis, you do not need to install these screws. However, if your printer has screw holes on the back of the Z-axis, you can use these screws to further lock the stiffener to the printer after installing the stiffener. |
| 8 | image | Screws for top mount latch (only for the combo version) | Fix the latch to the top mount. |
| 9 | image | Purge Wiper and its screws | To efficiently handle the waste filament discharged from the nozzle. |
| 10 | image | Spool Holder | For hold the external spool |
| 11 | image | PTFE tubes | For transportation of the filament Combo version: 730 mm *2, 830 mm *2, 600 mm *1 Non-combo version: 600 mm *1 |
| Sample Filament 20g | |||
| 12 | image | Unclogging Pin Tool | Special unclogged tool for the 0.4 mm hotend |
| 13 | image | Allen keys (H2 and H1.5) | Disassembly and assembly tools Two versions (with or without handles) are randomly shipped. |
| 14 | image | Heatbed Nozzle Wiper | Clean the nozzle before starting a print job |
| 15 | image | Cable Organizer | To organize the tool head cable and PTFE tubes |
| 16 | image | Bambu Scraper Blade and its screws | Print 'Scraper grip' from the built-in files， then install the scraper. |
| 17 | image | Spare Filament Cutter (only for the combo version) | One spare cutter for replacement |
| 18 | image | Lubricant Oil | Used for rail tracks, noise reduction of idler wheels, etc. Theoretically, lubricant oil can be used in any position, but it evaporates more easily. For example, lubricant oil on the guide rail may dry out relatively quickly, while lubricant grease has a longer effective usage time. |
| 19 | image | Lubricant Grease | Used for lubricating the lead screw, Y-axis guide rail steel rod, and extruder wheel of A1. The two package versions will be shipped randomly. Please note that it is strictly prohibited to use lubricant grease on the X-axis rail. |
| 20 | image | Supportive footpad | Installed on the bottom of the printer to help stabilize it. |
| 21 | image | 32 GB Micro SD card, pre-installed in the printer (For the appearance of the card, please refer to the one you receive.) | Store files such as print files, cached files, and videos of the printing process. |
End Notes
Чтобы обеспечить безопасное и эффективное выполнение, если у вас есть вопросы или сомнения по поводу процесса, описанного в этой статье, мы рекомендуем отправить тикет в техподдержку, касающийся вашей проблемы.
Пожалуйста, приложите фотографию или видео, иллюстрирующее проблему, а также любую дополнительную информацию, связанную с вашим inquiry.